West Systems Hardener - .44 Pint 205-A
West System 105A Epoxy Resin (32 fl oz) Bundle with 205A Fast Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)
West System 410 Microlight is the ideal low-density filler for creating a light easily-worked fairing compound especially suited for fairing large areas. Microlight mixes with greater ease than 407 Low-Density filler or microballoons and is approximately 30% easier to sand. 410 feathers to a fine edge and is also more economical for large fairing jobs. Not recommended under dark paint or other surfaces subject to high temperatures. Cures to a tan color.
West System Filler Microlight 5 oz
Unique viscous formula clings to the surface to break down tough grease & oil and remove stubborn scum line and rust stains. Bold, blue-green color makes it easy to see where product has been applied.
CRC MK3532 On & Off Gel Hull & Bottom Cleaner, 32 fl oz
205 Fast Hardener WEST SYSTEM Epoxy
West System Fast Kit (105-B & 205-B)
WEST System 205 Fast Hardeners
A catalog page for WEST 205A Fast Epoxy Hardener, .44 pint
West 205A Fast Hardener, 206 ml
West System 300 Mini Pump SetDesigned to be a convenient and accurate way of metering West System 105 Resin Epoxy. The Set contains one resin pump and two hardener pumps that directly mount onto the containers of the resin/hardener, eliminating the mess from measuring by weight or volume. The 300 Mini Pumps are designed to deliver a proper working ratio. One full pump stroke of resin for each one full pump stroke of hardener. Made of durable polypropylene, with proper care these pumps can last.
West System 300 Mini Pump Set
Unique viscous formula clings to the surface to break down tough grease & oil and remove stubborn scum line and rust stains. Bold, blue-green color makes it easy to see where product has been applied.
CRC MK3532 On & Off Gel Hull & Bottom Cleaner, 32 fl oz
West System 206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures. Mix with 105 resin to yield a rigid high-strength moisture-resistant solid with excellent bonding and coating properties.
West System - 206 Slow Hardener
West System 105 Epoxy Resin
West System Brand 501-8 Fiberglass & RepairEpoxy-based liquid colorants used to tint epoxy mixtures to provide an even color base for the final finish system. Colored surfaces also tend to highlight flaws and imperfections. Cured, pigmented epoxy surfaces are not a final finish surface, but require an additional opaque or UV filter coating for ultraviolet protection. Add to mixed resin/hardener at a rate of approximately one teaspoon of pigment to 8 fl oz of epoxy.
West System - White Pigment 4 oz